Showing 1–16 of 21 results
-
Dk ≤ 3.0 | Df ≤ 0.002 at 10GHz–28GHz | High-Frequency RF Stock Shapes
Supplied as precision high-frequency machining stock, our 5G Low-Dielectric PPS Rods & Sheets feature an ultra-low Dielectric Constant (Dk ≤ 3.0) and Dissipation Factor (Df ≤ 0.002) across 10GHz–28GHz millimeter-wave frequencies. Designed for RF connectors, 5G base station insulators, and radar housings, our stress-relieved stock shapes combine low signal attenuation with continuous heat resistance up to 220°C and near-zero moisture absorption.
Send your target rod diameter, sheet thickness, or drawing below for a prompt quote.
-
We supply Bearing-Grade & High-Load PPS Sheets and Rods engineered for unlubricated, high-PV wear components. Featuring an HDT exceeding 260°C, continuous thermal service at 200°C, ultra-low ionic impurities (semiconductor CMP safe), and exceptional fatigue/creep resistance, this modified PPS stock shape outperforms metals in heavy-load sliding. Ideal for semiconductor CMP retaining rings, textile guide rollers, automotive pump impellers, and industrial gears. Share your dimensions for a quick quote.
-
Machining Stock for Solvents, Alkalis, and Steam up to 220°C
Supplied as fully annealed machining stock, our Black PPS Rods & Sheets are formulated for precision components operating in solvents, alkalis, and hot steam up to 220°C. Send your target rod diameter, plate thickness, or drawing below for a prompt quote.
-
Continuous CF Fabric & Short CF Grades | 4x Stiffness | Aerospace Metal Replacement
We supply Carbon Fiber Reinforced PPS Rods & Sheets (available in Short CF 10%–35% and 50% Continuous Woven Carbon Fiber Fabric CFRTP composites). Engineered for aerospace and heavy-duty structural components, our CF-PPS stock shapes offer 4x the stiffness of short-fiber plastics, ultra-lightweight metal replacement, and continuous heat resistance over 200°C. Fully stress-relieved for precision CNC machining.
Submit your required rod diameter, sheet thickness, or component drawing below for a fast factory-direct quote.
-
We supply Chemical-Resistant Precision White GF PPS Plates as machining stock for project-specific industrial requirements. Share the key specification, intended process or application, and quantity for a practical review and quotation.
-
Ultrasonic Void-Tested | Multi-Stage Annealed for Zero-Warp CNC Milling | ISO & ASTM Compliant
We supply high-density, void-free Creep-Resistant PPS Sheets & Plates engineered specifically for precision CNC machining. Fully stress-relieved through multi-stage thermal annealing, our stock shapes eliminate warping and cracking under heavy volume removal. Available in custom colors (including Olive Green), custom thickness (up to 100mm+), and modified functional grades (GF40, CF ESD, PVX Wear, High CTI).
Share your target dimensions, color specs, or component drawings for an immediate factory-direct quotation.
-
Surface Resistivity 10^6–10^9 Ω/sq | Zero Static Buildup | Semiconductor Grade
We supply Semiconductor-Grade ESD Conductive PPS Rods & Sheets engineered with surface resistivity of 10^6–10^9 Ω/sq (Static Dissipative) and 10^3–10^5 Ω/sq (Conductive). Designed for cleanroom electronic handling and explosion-proof environments, our stress-relieved stock shapes combine controlled static dissipation with continuous heat resistance up to 220°C and near-zero outgassing.
Submit your required rod diameter, sheet thickness, or component drawing below for a fast factory-direct quote.
-
Void-Free Solid Center | Multi-Stage Annealed for CNC Lathes | Continuous 220°C
We supply Extruded Black PPS Rods engineered for high-precision CNC lathe turning. Featuring high UV stability, non-migratory black pigment, and zero moisture absorption, our solid round bars offer continuous heat resistance up to 220°C (peak 260°C) and PEEK-level chemical inertia. Fully 72-hour stress-relieved to ensure straight turning without rod bowing or central porosity.
Submit your required rod diameter and length below for a fast factory-direct quote.
-
We supply continuously extruded High-Density PPS (Polyphenylene Sulfide) Sheets and Plates engineered for severe thermal, chemical, and mechanical loads. Featuring continuous thermal resistance up to 220°C, inherent UL94 V-0 / 5V flame safety without additives, and total chemical insolvency in all solvents below 200°C, these annealed stock shapes deliver high hardness and high load-bearing capacity. Ideal for industrial drying ovens, food processing equipment, chemical reactors, and mechanical bearings. Custom thicknesses, sheet dimensions, colors, and pre-cut CNC blanks are fully available upon request. Share your specs for a quick quote.
-
Isotropic Low Warpage | HDT > 260°C | Ultra-Rigid Manifold Stock
Supplied as high-density machining stock, our Glass/Mineral Hybrid PPS Rods & Sheets (GF/MD 50%–60%) are engineered specifically to eliminate anisotropic warping in wide plates and complex manifold blocks. Combining glass fibers with micro-mineral fillers, this hybrid formulation delivers isotropic thermal expansion, HDT > 260°C, and exceptional flexural rigidity at lower material cost than pure GF40.
Send your target sheet thickness, rod diameter, or drawing below for a prompt quote.
-
5–3.0 W/m·K Thermal Conductivity | Electrically Insulating | Power Thermal Management
We supply High Thermal Conductive PPS Rods & Sheets formulated with ceramic thermal fillers. Delivering thermal conductivity up to 1.5–3.0 W/m·K (over 10x higher than standard plastics) while maintaining complete electrical insulation, our stock shapes replace heavy metal heat sinks in IGBT power modules and LED thermal management systems. Fully stress-relieved for precision CNC machining.
Submit your required rod diameter, sheet thickness, or drawing below for a fast factory-direct quote.
-
Engineered to replace heavy copper bearings, ceramics, and fluoroplastics under long-term high loads, our PPS rods and sheets combine PEEK-level chemical resistance with zero-moisture absorption and intrinsic UL94 V-0 flame retardancy. Fully stress-relieved for precision CNC machining, we supply semiconductor/medical-grade pure stock as well as custom-colored, glass/carbon-reinforced, and self-lubricating PVX stock shapes.
-
We supply high-rigidity PPS GF40 Sheets and Plates (40% glass filled) engineered for continuous heavy static load-bearing under elevated temperatures. Delivering an extreme flexural modulus of 12,000 MPa (12.0 GPa), an HDT exceeding 260°C, UL94 V-0 flame safety, and chemical/disinfectant immunity, this glass-filled stock shape replaces metals in structural brackets, automotive housings, and electronic insulators. Custom thicknesses, sheet dimensions, colors, and filler ratios are fully available upon request. Share your specs for a quick quote.
-
10/10/10 Wear Formula (CF/PTFE/Graphite) | Low Friction | High PV Limit | Oil-free dry operation
We supply PPS-PVX Bearing Grade Rods & Sheets (10% Carbon Fiber + 10% PTFE + 10% Graphite) engineered for dry-running, heavy-load sliding applications up to 220°C. Fully stress-relieved for precision CNC machining, our stock shapes eliminate cold-flow deformation and replace bronze, ceramics, and PTFE in steam and chemical environments.
Share your required rod diameter, sheet thickness, or drawing below for a fast quote.
-
HDT > 260°C | Void-Free Solid Center | Multi-Stage Annealed for CNC Lathes
We supply high-density, void-free Precision PPS Rods engineered for high-temperature and chemical-resistant CNC turning. Manufactured to strict international quality standards and 72-hour stress-relieved, our solid-core rods feature HDT > 260°C, zero moisture absorption, and smooth lathe threading without internal porosity or cracking. Available in Natural Beige, Black, and custom modified grades (GF, CF, Wear).
Submit your required rod diameter and length below for a fast factory-direct quote.
-
100% Pure Resin | Zero Tool Wear Turning | Semiconductor Cleanroom Purity
Tired of glass fibers dulling your CNC lathe tools or contaminating semiconductor vacuum chambers? Our Pure Natural PPS Rods (100% Unfilled Resin) deliver PEEK-level chemical inertia, near-zero ionic outgassing, and mirror-smooth turning without cutter wear. Fully stress-relieved to prevent bowing during deep drilling.
Send your target rod diameter and length below for a quick factory-direct quote.
